NF EN ISO 8469

NF EN ISO 8469

October 2013
Standard Cancelled mandatory application standard
  • Consult online for free
  • Consult the entire collection of French and European standards for free in the regional delegations of the AFNOR Group by clicking here

Small craft - Non-fire-resistant fuel hoses

ISO 8469:2013 specifies general requirements and physical tests for non-fire-resistant hoses for conveying petrol or petrol blended with ethanol and diesel fuel or diesel fuel blended with FAME, designed for a working pressure not exceeding 0,34 MPa for hoses with inner diameter up to and including 10 mm and 0,25 MPa for hoses up to 63 mm inner diameter in craft of hull length up to 24 m. It applies to hoses for small craft with permanently installed fuel systems. Specifications for fire-resistant hoses are given in ISO 7840. Specifications for permanently installed fuel systems are given in ISO 10088.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

October 2013

Number of pages

18 p.

Reference

NF EN ISO 8469

ICS Codes

47.020.30   Piping systems
47.080   Small craft
83.140.40   Hoses

Classification index

J95-029

Print number

1 - 18/09/2013

International kinship

ISO 8469:2013

European kinship

EN ISO 8469:2013
Sumary
Small craft - Non-fire-resistant fuel hoses

ISO 8469:2013 specifies general requirements and physical tests for non-fire-resistant hoses for conveying petrol or petrol blended with ethanol and diesel fuel or diesel fuel blended with FAME, designed for a working pressure not exceeding 0,34 MPa for hoses with inner diameter up to and including 10 mm and 0,25 MPa for hoses up to 63 mm inner diameter in craft of hull length up to 24 m.

It applies to hoses for small craft with permanently installed fuel systems.

Specifications for fire-resistant hoses are given in ISO 7840. Specifications for permanently installed fuel systems are given in ISO 10088.

Replaced standards (1)
NF EN ISO 8469
November 2006
Standard Cancelled
Small craft - Non-fire-resistant fuel hoses

<p>ISO 8469:2006 specifies general requirements and physical tests for non-fire-resistant hoses for conveying petrol end diesel oil designed for a working pressure not exceeding 0,34 MPa for hoses with inner diameter up to and including 10 mm and 0,25 MPa for hoses up to 63 mm inner diameter in craft of hull length up to 24 m.</p> <p>ISO 8469:2006 applies to hoses for small craft with permanently installed fuel systems.</p> <p>Specifications for fire-resistant hoses are laid down in ISO 7840.</p>

Standard replaced by (1)
NF EN ISO 8469
September 2018
Standard Cancelled
Small craft - Non-fire-resistant fuel hoses

<p>ISO 8469:2013 specifies general requirements and physical tests for non-fire-resistant hoses for conveying petrol or petrol blended with ethanol and diesel fuel or diesel fuel blended with FAME, designed for a working pressure not exceeding 0,34 MPa for hoses with inner diameter up to and including 10 mm and 0,25 MPa for hoses up to 63 mm inner diameter in craft of hull length up to 24 m.</p> <p>It applies to hoses for small craft with permanently installed fuel systems.</p> <p>Specifications for fire-resistant hoses are given in ISO 7840. Specifications for permanently installed fuel systems are given in ISO 10088.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Exigences générales
    1
  • 4 Diamètre intérieur nominal
    1
  • 5 Essais physiques sur tuyaux finis
    2
  • 5.1 Généralités
    2
  • 5.2 Liquides d'essai
    2
  • 5.3 Pression d'éclatement
    2
  • 5.4 Essai de résistance à l'écrasement sous vide
    3
  • 5.5 Variation de volume dans les liquides d'essai
    3
  • 5.6 Réduction de la masse du tuyau souple soumis à essai
    3
  • 5.7 Effet de l'ozone
    3
  • 5.8 Perméabilité au carburant
    3
  • 5.9 Essai de flexion à basse température
    4
  • 5.10 Essai d'abrasion - tuyaux de remplissage de carburant avec fils métalliques hélicoïdaux intégrés, d'un diamètre supérieur ou égal à 38 mm
    4
  • 5.11 Résistance à la chaleur sèche
    4
  • 5.12 Essai de résistance à l'huile
    4
  • 5.13 Essai d'adhérence
    5
  • 6 Marquage
    5
  • Annexe A (normative) Essai de perméabilité au carburant (ou méthode d'essai équivalente)
    6
  • Bibliographie
    8
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ