NF EN ISO 11299-3

NF EN ISO 11299-3

December 2018
Standard Current

Plastics piping systems for renovation of underground gas supply networks - Part 3 : lining with close-fit pipes

This document, in conjunction with ISO 11299‑1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of gas supply networks. It applies to pipes and fittings, as manufactured, as well as to the installed lining system. It is applicable to polyethylene (PE) pipe of either solid wall single layer or co-extruded layer construction, which is reduced in the factory or on site to provide a close-fitting independent or interactive pressure pipe liner, as well as associated fittings and joints for the construction of the lining system. This document is not applicable for coated PE pipes having a peelable, contiguous, thermoplastics additional layer on the outside of the pipes. It is applicable to PE pipes, fittings and assemblies intended to be used at an operating temperature of 20 °C as the reference temperature. NOTE For other operating temperatures, guidance is given in ISO 4437‑5:2014.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

December 2018

Number of pages

28 p.

Reference

NF EN ISO 11299-3

ICS Codes

23.040.20   Plastics pipes
23.040.45   Plastics fittings
75.200   Petroleum products and natural gas handling equipment

Classification index

T54-966-3

Print number

1

International kinship

ISO 11299-3:2018

European kinship

EN ISO 11299-3:2018
Sumary
Plastics piping systems for renovation of underground gas supply networks - Part 3 : lining with close-fit pipes

This document, in conjunction with ISO 11299‑1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of gas supply networks.

It applies to pipes and fittings, as manufactured, as well as to the installed lining system. It is applicable to polyethylene (PE) pipe of either solid wall single layer or co-extruded layer construction, which is reduced in the factory or on site to provide a close-fitting independent or interactive pressure pipe liner, as well as associated fittings and joints for the construction of the lining system. This document is not applicable for coated PE pipes having a peelable, contiguous, thermoplastics additional layer on the outside of the pipes.

It is applicable to PE pipes, fittings and assemblies intended to be used at an operating temperature of 20 °C as the reference temperature.

NOTE For other operating temperatures, guidance is given in ISO 4437‑5:2014.

Replaced standards (1)
NF EN ISO 11299-3
May 2013
Standard Cancelled
Plastics piping systems for renovation of underground gas supply networks - Part 3 : lining with close-fit pipes

<p>ISO 11299-3:2011, in conjunction with ISO 11299-1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of gas supply networks.</p> <p>ISO 11299-3:2011 is applicable to polyethylene (PE) pipes for both independent and interactive pressure pipe liners as well as associated fittings and joints for the construction of the lining system.</p>

Table of contents
View the extract
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Symboles et abréviations
  • 5 Tuyaux au stade "M"
  • 6 Raccords au stade " M "
  • 7 Accessoires
  • 8 Aptitude à l'emploi du système de rénovation installé au stade " I "
  • 9 Pratique d'installation
  • Annexe A Tuyau en polyéthylène (PE) plié en usine, rétabli à son état initial à chaud - Détermination de la capacité de mémoire
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ